The laminate comprises an inner layer, a structural body and an outer layer. The inner layer consists of a surfacing veil saturated, in a ratio of 90% Resin, 10% glass. This ratio will ensure that the fluid contact no exposed fiber, but that is the resin. Below are two MAT laminaran 450, the ratio will be 75% resin and 25% glass. The veil of the two mat surface more, will reach the 1,8 mm of thickness, This laminate denominating “anticorrosive barrier” the “liner interior”. The structural body and is made with resin saturated glass strands prestressed, proportion of 40% Resin 60% glass, This operation is performed by Filament Winding system with automatic scheduled according to ASTM D 3299-00 until you reach the desired thickness.

It responds to the sequence detailed pipe fabrication, in the case of making tank corps. In addition to all previously exposed, the outer layer is formed by a surface veil ratio 90% Resin 10% glass, thus reaching the desired thickness, for the manufacture of caps torispherical, rolled tanks and bases in general, which varies roving fabric is used in place of the structural tissue Filament Winding and fittings for pipes rolling sequence is repeated according to standard PS 15-69.

Note that for main, accessories, tanks, to special teams in general, they will be installed in the open, external surface finish will finish as a layer of gel-coat, not less than 0.6 mm thick and with a 20% titanium dioxide (white) and ultraviolet absorber.